| |
|
|
 Gas compressor |
 Home > Product >Gas compressor
|
| |
 N2 Gas booster system |
- It is consisted of N2 gas generator, gas tank, gas booster compressor and HP gas cylinder and
used for boosting low pressure nitrogen gas to high pressure gas on one packaged system.
- Application : Gas injection molding, Laser cutting, Purge or boosting up of high pressure gas, LNG
tanker, Tyre filling-up for commercial cars or planes |
|
1) Characteristics
- Compact & simple configuration to install at small space.
- Low maintenance costs by one packaged system.
- Easily moveable to required site.
- Possible to design according to buyer's option.
- Origin : KOREA
|
2) Technical data (Air-cooled) |
| |
| System |
Description |
| N2 gas generator |
- Type : PSA or Membrane
- Gas purity : 90 ~ 99.999%
- Flow capacity : 5 ~ 100 Nm3/hr at purity 98%
- Inlet air pressure : 100 psig
- Discharge gas pressure : 70 psig
- Electric power : 230V, 50/60 Hz, single phase |
| N2 gas booster compressor |
- Type : 3/4 stage, air-cooled, oil-lubricated, piston reciprocating
- Flow capacity : 5 ~ 40 Nm3/hr
- Suction gas pressure : 30 ~ 100 psig
- Discharge gas pressure : 2,000 ~ 5,000 psig
- Electric power : 230/380/440V, 50/60Hz, 3Ph. |
| 2 gas reserved tank/filter ** |
- LP gas tank : Max. 150 psig
- HP gas cylinder : Max. 4,800 psig
- HP line filter : Max. 5,000 psig |
|
* Above data are subject to alter without prior information.
** High pressure cylinder / filter unit for Max. 330 bar are available. |
|
|
|
High pressure compressor
